DI water cooling system
DI water cooling system
Cooling water shall be free from impurities. DOT NOT use well water or river water .To prevent the scale formation, ensure good cooling result, and greatly reduce the failure rate,Soften Water or Distilled Water are strongly recommended as cooling water for induction equipment.
PH: 7-8.5
Suspended solids＜10mg/L
Hardness＜60mg/L
Conductivity＜500μA/cm3
Chloride ion：Average＜60mg/L
Sulfate ion＜100mg/L
Iron＜2mg/L
Solubilitysio2＜6mg/L
Dissolved solid＜300mg/L
|
DI water cooling system |
Cooling |
Cooling Tower for DI water cooling system （Prepared by customers） |
Capacity of water tank |
|||
|
|
|
Water flow of pump |
Power output of Pump |
Lift of pump |
Water flow of cooling tower |
|
|
BKL-250-4.0 |
Power unit & Heater |
≥15m3/h |
4KW |
≥22m |
≥10m3/h |
≥5 m3 |
|
BKL-250-7.5 |
Power unit & Heater |
≥25m3/h |
4KW |
≥22m |
≥16m3/h |
≥10 m3 |
Feature
- The use of DI water ensures non-scaling and non-clog in water pipe.
- Stainless steel DI water tank and connector avoid rusting
- Small space required, easy to move
- Low energy loss, operation is simple and reliable.
Specification
|
Model |
BKL-250-4.0 |
BKL-400-7.5 |
|
Cooling capacity |
51600Kcal/h |
155000 Kcal/h |
|
Water flow |
9-18 m3 /h |
20-42 m3 /h |
|
Power of water pump |
4.0KW |
7.5KW |
|
Water capacity of tank |
250L |
400L |
|
Outside diameter of outlet cooling water |
DN40(Quick coupler) |
DN65(Flange) |
|
Dimension |
1300× 870× 930 (mm) |
1550× 1000× 1050 (mm) |
|
Noise |
≤70 dB(A) |
≤70 dB(A) |
|
Ambient temperature |
8～40℃ |
8～40℃ |
Installation (For reference only)
|
Model |
DI water cooling system |
Cooling |
Cooling Tower for DI water cooling system （Prepared by customers） |
Capacity of water tank |
|||
|
Water flow of pump |
Power output of Pump |
Lift of pump |
Water flow of cooling tower |
||||
|
MFP-100D2 |
BKL-250-4.0 |
Power unit & Heater |
≥15m3/h |
4KW |
≥22m |
≥10m3/h |
≥5 m3 |
|
MFP-160D2 |
BKL-250-7.5 |
Power unit & Heater |
≥25m3/h |
4KW |
≥22m |
≥16m3/h |
≥10 m3 |
|
MFP-250D2 |
BKL-250-4.0 |
Power unit |
≥30m3/h |
5.5KW |
≥22m |
≥25m3/h |
≥15 m3 |
|
BKL-400-7.5 |
Heater |
||||||
|
MFP-350D2 |
BKL-400-4.0 |
Power unit |
≥40m3/h |
5.5KW |
≥22m |
≥32m3/h |
≥15 m3 |
|
BKL-400-7.5 |
Heater |
||||||
|
MFP-500D2 |
BKL-250-4.0 |
Power unit |
≥55m3/h |
7.5KW |
≥22m |
≥45m3/h |
≥20 m3 |
|
BKL-400-7.5 |
Heater |
||||||
|
MFP-600D2 |
BKL-250-4.0 |
Power unit |
≥65 m3/h |
9.2KW & 11KW |
≥22m |
≥55m3/h |
≥25 m3 |
|
BKL-400-7.5 |
Heater |
||||||
|
MFP-750D2 |
BKL-250-4.0 |
Power unit |
≥80m3/h |
9.2KW & 11KW |
≥22m |
≥70m3/h |
≥30 m3 |
|
BKL-400-7.5 |
Heater |
||||||
